Weapon Care
Overview
Weapon Care
Bedding Products - Accurise your Rifle!
Highlights
- for bedding
- 2 component system
- quick
- accurate
More information
Product photos
Specification
Technology
Care and repair set from professionals for professionals!
We offer with the new professional repair and care set. The products are newly developed, with very high-quality products for professional use at the weapon cleaning and reparir.
Stock Bedding Agent VOERE 2K 700
- VOERE 2K 700 uses PU, which is from the professional range of plastics and could be used so far only by specialised companies. In the meantime, even smaller containers are available at VOERE with simple hardeners so that VOERE 2K 700 can also be used in gunsmith workshops. PU is somewhat more expensive than other agents used so far, but has decisive benefits to offer. VOERE 2K 700 becomes hard but not brittle, and is the ideal material for stock bedding. VOERE 2K 700 does not require cumbersome mixing, but instead, it is mixed and ready for use through the spray nozzle simply to be applied. If you do not require the entire cartridge for the bedding, you can close the cartridge and use it again. Excess and residues must not be disposed of as in the case of other products. The tip containing about ¼ teaspoon material is replaced. As a result, VOERE 2K 700 is more economical despite the smaller packing.
- The material is a thick, almost Gel like, liquid and does not trickle away while it is being applied. Using the practical spray tip the material can also be applied in corners and other spots difficult to reach. The VOERE 2K 700 is supplied with a separating spray. As a result, adhesive locations can be defined easily. You can recoat the material so that the repaired spot can be matched with respect to the colour.
- Benefits compared to other Bedding Compounds on the market:
- Other acrylic based compounds: Acrylate is the material that is used in instant adhesives. It is difficult to use and does not harden properly. The application of acrylate is messy since the material sticks. In case excess is applied, it is very difficult to remove the excessive material. Flakes can be added to the acrylate so that it becomes like gel. Otherwise, the material is very thin and hence, barely suitable for the stock bedding.
- Other agents using an epoxy base: Epoxy is a two-component material, which, for example, is used to repair boats. Epoxy becomes very brittle and hard like stone when it cures. It can tear and in case of shocks, the material springs and gets cracked. The material is suitable for inferior beddings and minor repairs, but however, owing to mixing in a cup and application using a putty knife, it is difficult to apply and work with. It is less suitable for high-quality beddings since it is brittle.